Skip to main content

Research Repository

Advanced Search

All Outputs (13)

A three-dimensional whole-body model to predict human walking on level ground (2022)
Journal Article
Hu, D., Howard, D., & Ren, L. (2022). A three-dimensional whole-body model to predict human walking on level ground. Biomechanics and Modeling in Mechanobiology, https://doi.org/10.1007/s10237-022-01629-7

Predictive simulation of human walking has great potential in clinical motion analysis and rehabilitation engineering assessment, but large computational cost and reliance on measurement data to provide initial guess have limited its wide use. We dev... Read More about A three-dimensional whole-body model to predict human walking on level ground.

A novel hydraulic energy-storage-and-return prosthetic ankle : design, modelling and simulation (2020)
Thesis
Pace, A. A novel hydraulic energy-storage-and-return prosthetic ankle : design, modelling and simulation. (Thesis). University of Salford

In an intact ankle, tendons crossing the joint store energy during the stance phase of walking
prior to push-off and release it during push-off, providing forward propulsion. Most prosthetic
feet currently on the market – both conventional and ener... Read More about A novel hydraulic energy-storage-and-return prosthetic ankle : design, modelling and simulation.

Using magneto-inertial-measurement-units to track upper-limb movement during rehabilitation (2020)
Thesis
Al-ani, A. Using magneto-inertial-measurement-units to track upper-limb movement during rehabilitation. (Thesis). University of Salford

Functional Electrical Stimulation (FES) can be used to support upper-limb rehabilitation after a stroke. A key aspect of FES control and also patient monitoring is the automatic tracking of upper-limb motion during intensive and functional practise o... Read More about Using magneto-inertial-measurement-units to track upper-limb movement during rehabilitation.

A fast inverse dynamics model of walking for use in optimisation studies (2016)
Journal Article
Salehi, S., Ren, L., & Howard, D. (2016). A fast inverse dynamics model of walking for use in optimisation studies. Computer Methods in Biomechanics and Biomedical Engineering, 19(11), 1201-1209. https://doi.org/10.1080/10255842.2015.1124267

Computer simulation of human gait, based on measured motion data, is a well-established technique in biomechanics. However, optimisation studies requiring many iterative gait cycle simulations have not yet found widespread application because of thei... Read More about A fast inverse dynamics model of walking for use in optimisation studies.

The strengths and weaknesses of inverted pendulum models of human walking (2014)
Journal Article
McGrath, M., Howard, D., & Baker, R. (2015). The strengths and weaknesses of inverted pendulum models of human walking. Gait & Posture, 41(2), 389-394. https://doi.org/10.1016/j.gaitpost.2014.10.023

An investigation into the kinematic and kinetic predictions of two ‘inverted pendulum’ (IP) models of
gait was undertaken. The first model consisted of a single leg, with anthropometrically correct mass and
moment of inertia, and a point mass at th... Read More about The strengths and weaknesses of inverted pendulum models of human walking.

Biomechanical analysis of force distribution in human finger extensor mechanisms (2014)
Journal Article
Hu, D., Ren, L., Howard, D., & Zong, C. (2014). Biomechanical analysis of force distribution in human finger extensor mechanisms. BioMed Research International, 2014, 1-9. https://doi.org/10.1155/2014/743460

The complexities of the function and structure of human fingers have long been recognised. The in vivo forces in the human finger tendon network during different activities are critical information for clinical diagnosis, surgical treatment, prosthet... Read More about Biomechanical analysis of force distribution in human finger extensor mechanisms.

Biomechanical analysis of the human finger extensor mechanism during isometric pressing (2014)
Journal Article
Milanese, S., Hu, D., Howard, D., & Ren, L. (2014). Biomechanical analysis of the human finger extensor mechanism during isometric pressing. PLoS ONE, 9(4), e94533. https://doi.org/10.1371/journal.pone.0094533

This study investigated the effects of the finger extensor mechanism on the bone-to-bone contact forces at the interphalangeal and metacarpal joints and also on the forces in the intrinsic and extrinsic muscles during finger pressing. This was done w... Read More about Biomechanical analysis of the human finger extensor mechanism during isometric pressing.

The effects of transverse rotation angle on compression and effective lever arm of prosthetic feet during simulated stance (2012)
Journal Article
Major, M., Howard, D., Jones, R., & Twiste, M. (2012). The effects of transverse rotation angle on compression and effective lever arm of prosthetic feet during simulated stance. Prosthetics and Orthotics International, 36(2), 231-235. https://doi.org/10.1177/0309364611435996

Background and Aim: Unlike sagittal plane prosthesis alignment, few studies have observed the effects of transverse plane alignment on gait and prosthesis behaviour. Changes in transverse plane rotation angle will rotate the points of loading on the... Read More about The effects of transverse rotation angle on compression and effective lever arm of prosthetic feet during simulated stance.

The influence of the mechanical properties of trans-tibial prostheses on amputee performance (2010)
Thesis
Major, M. The influence of the mechanical properties of trans-tibial prostheses on amputee performance. (Thesis). Salford : University of Salford

Achieving the required functionality of a trans-tibial prosthesis during the stance phase of
gait (e.g., shock absorption, close to normal roll-over characteristics, and smooth transition
into swing) depends on the "Amputee Independent Prosthesis P... Read More about The influence of the mechanical properties of trans-tibial prostheses on amputee performance.

A generic analytical foot rollover model for predicting translational ankle kinematics in gait simulation studies (2010)
Journal Article
Ren, L., Howard, D., Ren, L., Nester, C., & Tian, L. (2010). A generic analytical foot rollover model for predicting translational ankle kinematics in gait simulation studies. Journal of Biomechanics, 43(2), 194-202. https://doi.org/10.1016/j.jbiomech.2009.09.027

The objective of this paper is to develop an analytical framework to representing the ankle-foot kinematics by modelling the foot as a rollover rocker, which cannot only be used as a generic tool for general gait simulation but also allows for case-s... Read More about A generic analytical foot rollover model for predicting translational ankle kinematics in gait simulation studies.

Automated design of robust discriminant analysis classifier for foot pressure lesions using kinematic data (2005)
Journal Article
Goulermas, J., Findlow, A., Nester, C., Howard, D., & Bowker, P. (2005). Automated design of robust discriminant analysis classifier for foot pressure lesions using kinematic data. IEEE Transactions on Biomedical Engineering, 52(9), 1549-1562. https://doi.org/10.1109/TBME.2005.851519

In the recent years, the use of motion tracking systems for acquisition of functional biomechanical gait data, has received increasing interest due to the richness and accuracy of the measured kinematic information. However, costs frequently restrict... Read More about Automated design of robust discriminant analysis classifier for foot pressure lesions using kinematic data.

Finite element analysis of footwear and ground interaction (2005)
Journal Article
Sun, Z., Howard, D., & Moatamedi, M. (2005). Finite element analysis of footwear and ground interaction. Strain, 41(3), 113-117. https://doi.org/10.1111/j.1475-1305.2005.00205.x

Military boots are designed to prevent the soft tissue and skeletal structure of the feet from damage under heavy usage. Good slip-resistant tread patterns of the outer-sole are vital to minimise the risk or severity of slipping under demanding condi... Read More about Finite element analysis of footwear and ground interaction.

Design and development of an anthropomorphic metamorphic robotic hand
Thesis
Marcenko, O. (in press). Design and development of an anthropomorphic metamorphic robotic hand. (Dissertation). University of Salford

This work presents analysis of the 4-fingered robotic hand and is a continuation of the Bachelor’s thesis “Design and Development of an Anthropomorphic Metamorphic Robotic Hand”. First, general comparison between scientific and commercial robotic han... Read More about Design and development of an anthropomorphic metamorphic robotic hand.