Skip to main content

Research Repository

Advanced Search

Outputs (21)

Operational measurement of frequency response functions (2024)
Journal Article
McGee, R., Elliott, A., Meggitt, J., & Smith, J. (in press). Operational measurement of frequency response functions. #Journal not on list, https://doi.org/10.61782/fa.2023.1265

A common problem that arises during modal testing is the inability to directly excite degrees-of-freedom to obtain frequency response functions (FRFs). It has been shown previously that reliable reproduction of FRFs via indirect excitation is difficu... Read More about Operational measurement of frequency response functions.

Prediction of Radiated Structural Noise Using Decomposed Vibro-Acoustic Frequency Response Functions (2024)
Journal Article
Barton, L., Elliott, A., & Smith, J. (in press). Prediction of Radiated Structural Noise Using Decomposed Vibro-Acoustic Frequency Response Functions. #Journal not on list, https://doi.org/10.61782/fa.2023.1125

The manner in which a system radiates noise is dependent upon the resonant behaviour and the forced vibration of the structure. It has been shown previously that the modes of such a system can be identified by performing a singular value decompositio... Read More about Prediction of Radiated Structural Noise Using Decomposed Vibro-Acoustic Frequency Response Functions.

Development of electric scooter alerting sounds using psychoacoustical metrics (2022)
Journal Article
Walton, T., Torija Martinez, A., & Elliott, A. (2022). Development of electric scooter alerting sounds using psychoacoustical metrics. Applied Acoustics, 201(109136), https://doi.org/10.1016/j.apacoust.2022.109136

In recent years electric micromobility transportation, including electric scooters, has seen a surge in popularity due to technological advances and the move to lower emission transport. Although offering a range of societal benefits, such as reduced... Read More about Development of electric scooter alerting sounds using psychoacoustical metrics.

Acoustic optimization of a contra-rotating propeller rig (2022)
Journal Article
Casagrande Hirono, F., Torija Martinez, A., & Elliott, A. (2022). Acoustic optimization of a contra-rotating propeller rig. https://doi.org/10.1121/10.0010735

With the advance of unmanned aerial vehicles as a viable alternative for urban transportation, it is imperative that these vehicles have a low impact on community noise. Contra-rotating propeller technologies offer interesting advantages over traditi... Read More about Acoustic optimization of a contra-rotating propeller rig.

Vibro-acoustic analysis of a domestic product based on experimental measurement and hybrid modelling (2021)
Journal Article
Meggitt, J., Banwell, G., Elliott, A., Moorhouse, A., & Langley, R. (2021). Vibro-acoustic analysis of a domestic product based on experimental measurement and hybrid modelling. Applied Acoustics, 182, 108144. https://doi.org/10.1016/j.apacoust.2021.108144

The purpose of this paper is to present a case study whereby a hybrid experimental-numerical model is used to analyse the structureborne radiation from a domestic product (vacuum cleaner head). The passive (including radiative) properties of the str... Read More about Vibro-acoustic analysis of a domestic product based on experimental measurement and hybrid modelling.

Component replacement TPA : a transmissibility-based structural modification method for in-situ transfer path analysis (2021)
Journal Article
Meggitt, J., Elliott, A., Moorhouse, A., Jalibert, A., & Franks, G. (2021). Component replacement TPA : a transmissibility-based structural modification method for in-situ transfer path analysis. Journal of Sound and Vibration, 499, 115991. https://doi.org/10.1016/j.jsv.2021.115991

In-situ Transfer Path Analysis is a diagnostic method used to analyse the propagation of noise and vibration through complex built-up structures. Its defining feature is the invariant characterisation of an assembly’s active components (i.e. vibrat... Read More about Component replacement TPA : a transmissibility-based structural modification method for in-situ transfer path analysis.

An experimental exploration of the properties of random frequency response functions (2020)
Journal Article
Clot, A., Meggitt, J., Langley, R., Elliott, A., & Moorhouse, A. (2021). An experimental exploration of the properties of random frequency response functions. Journal of Sound and Vibration, 491, 115773. https://doi.org/10.1016/j.jsv.2020.115773

The vibro-acoustic analysis of complex structures over a broadband frequency range is an extremely challenging problem that may often require the use of a hybrid deterministic-statistical approach. Due to manufacturing imperfections, the frequency re... Read More about An experimental exploration of the properties of random frequency response functions.

Evaluation of uncertainties in classical and component (blocked force) transfer path analysis (TPA) (2019)
Journal Article
Moorhouse, A., Meggitt, J., & Elliott, A. (2019). Evaluation of uncertainties in classical and component (blocked force) transfer path analysis (TPA). SAE Technical Papers, 1(4), 1779-1789. https://doi.org/10.4271/2019-01-1544

Transfer path analysis (TPA) has become a widely used diagnostic technique in the automotive and other sectors. In classic TPA, a two-stage measurement is conducted including operational and frequency response function (FRF) phases from which the con... Read More about Evaluation of uncertainties in classical and component (blocked force) transfer path analysis (TPA).

Development of a hybrid FE-SEA-experimental model (2019)
Journal Article
Clot, A., Meggitt, J., Langley, R., Elliott, A., & Moorhouse, A. (2019). Development of a hybrid FE-SEA-experimental model. Journal of Sound and Vibration, 452(Jul 19), 112-131. https://doi.org/10.1016/j.jsv.2019.03.027

The vibro-acoustic response of complex structures with uncertain properties is a problem of great concern for modern industries. In recent years, much research has been devoted to the prediction of this response in the mid-frequency range where, beca... Read More about Development of a hybrid FE-SEA-experimental model.

A covariance based framework for the propagation of uncertainty through inverse problems with an application to force identification (2019)
Journal Article
Meggitt, J., Moorhouse, A., & Elliott, A. (2019). A covariance based framework for the propagation of uncertainty through inverse problems with an application to force identification. Mechanical Systems and Signal Processing, 124, 275-297. https://doi.org/10.1016/j.ymssp.2018.11.038

Inverse problems are widely encountered in fields as diverse as physics, geophysics, engineering and finance. In the present paper, a covariance based framework for the estimation of their uncertainty is presented and applied to the problem of inve... Read More about A covariance based framework for the propagation of uncertainty through inverse problems with an application to force identification.