Replication of clinical prosthetic sockets for research purposes

Chadwell, Alix; Kenney, Laurence; Prince, Michael; Olsen, Jennifer; Dyson, Matthew

Abstract

For research in the field of prosthetics to be representative of clinical realities, studies require inclusion of clinical standard prosthetic sockets. This necessitates involvement of a prosthetist (clinical professional) in any study, which is to truly explore the effectiveness of existing or novel prosthetic technologies. Unfortunately, there is a global shortage of prosthetists. With many technological advances in upper-limb prosthetics coming from engineering focused labs, it is unsurprising that studies are frequently conducted with anatomically intact individuals. In this paper, we present a method to clone the shape of a clinical standard prosthetic socket for research purposes. The technique uses silicone to capture the socket shape; this is then converted into a plaster mold, which can be used to manufacture an identically shaped socket using standard clinical manufacturing techniques. The whole process can be achieved without the involvement of a prosthetist. To validate the proposed technique, molds from an original socket and socket clone were 3D scanned. The distance between the aligned meshes were measured using CloudCompare software. The mean distance between the points on the 2 meshes was 0.16 mm (standard deviation 0.38 mm). This proof-of-concept study demonstrates that the proposed new approach to cloning a clinical standard prosthetic socket is feasible and accurate. This technique will facilitate improvements in the assessment of prosthetic technologies. The process is nondestructive, thus also opening opportunities for socket design and electrode placement research with the removal of confounding factors relating to socket shape.

Citation

Chadwell, A., Kenney, L., Prince, M., Olsen, J., & Dyson, M. (2024). Replication of clinical prosthetic sockets for research purposes. Prosthetics and Orthotics International, https://doi.org/10.1097/PXR.0000000000000386

• Journal Article Type: Article
• Acceptance Date: Jul 29, 2024
• Online Publication Date: Nov 27, 2024
• Publication Date: Nov 27, 2024
• Deposit Date: Dec 3, 2024
• Publicly Available Date: Dec 3, 2024
• Journal: Prosthetics and orthotics international
• Print ISSN: 0309-3646
• Electronic ISSN: 1746-1553
• Publisher: SAGE Publications
• Peer Reviewed: Peer Reviewed
• DOI: https://doi.org/10.1097/PXR.0000000000000386