All Outputs (73)

Characteristics of water droplet impaction behaviour on a polished steel heated surface: part II (2007)
Journal Article
Akhtar, S., Nasr, G., & Yule, A. (2007). Characteristics of water droplet impaction behaviour on a polished steel heated surface: part II. Atomization and Sprays, 17(8), 683-729. https://doi.org/10.1615/AtomizSpr.v17.i8.20

This article presents the results and analysis of the droplet impaction on a hot stainless steel surface which is in two parts. Part I of this study reported the results of analysis of high speed visualisations of droplet impaction phenomena on a sta... Read More about Characteristics of water droplet impaction behaviour on a polished steel heated surface: part II.

High pressure spray cooling of a moving surface (2006)
Journal Article
Nasr, G., Sharief, R., & Yule, A. (2006). High pressure spray cooling of a moving surface. Journal of Heat Transfer, 128(8), 752-760. https://doi.org/10.1115/1.2217747

A novel technique is described for investigating spray cooling of moving hot surfaces. An experimental investigation is described for vertically downwards water sprays impinging on a horizontal steel annulus of 250 mm diameter with a surface tempera... Read More about High pressure spray cooling of a moving surface.

Transient spray cooling of top and bottom moving high temperature surfaces (2004)
Thesis
Abdalla, A. Transient spray cooling of top and bottom moving high temperature surfaces. (Dissertation). University of Salford

High pressure water spray cooling, widely used in various industrial process applications due to high impact force and high dissipating ability which is required in various manufacturing processes such as scale removal from oil wells, scale removal... Read More about Transient spray cooling of top and bottom moving high temperature surfaces.

Spray coating in health environment
Presentation / Conference
Burby, M., Nasr, G., Nourian, A., & Stewart, J. Spray coating in health environment. Presented at ILASS Americas 2012 - 24th annual conference on liquid atomization and spray systems, San Antonio, Texas, United States of America

The effective use of disinfectants on surfaces, therefore, within the health care environment constitutes an important factor in preventing Hospital Acquired Infections (HAIs). For surface disinfection processes in hospitals the open bucket and close... Read More about Spray coating in health environment.

Removal of scales in petroleum production tubing utilising high pressure atomisers
Presentation / Conference
Enyi, G., Nasr, G., Nourian, A., El Kamkhi, M., & Burby, M. Removal of scales in petroleum production tubing utilising high pressure atomisers. Presented at ICLASS 2012, 12th Triennial International Conference on Liquid Atomization and Spray Systems, Heidelberg, Germany

Scale is a mineral deposit usually formed on surfaces in contact with water. Scale deposition in petroleum production wells can be attributed to mixing of incompatible waters, changes in thermodynamic, kinetic and hydrodynamic conditions in oilfiel... Read More about Removal of scales in petroleum production tubing utilising high pressure atomisers.

Role of connate water salinity in gas dispersion during enhanced gas recovery by carbon dioxide injection and sequestration
Thesis
Abba, M. (in press). Role of connate water salinity in gas dispersion during enhanced gas recovery by carbon dioxide injection and sequestration. (Thesis). University of Salford

A better understanding of the factors that influence mixing between CO2 and CH4 in natural gas reservoirs can provide an avenue to minimise the gas dispersion during Enhanced Gas Recovery (EGR). This highlights EGR’s field scale adoption as a poten... Read More about Role of connate water salinity in gas dispersion during enhanced gas recovery by carbon dioxide injection and sequestration.

Experimental investigation of interfacial tension in two-phase system involving methane and water
Thesis
Yahaya, A. (in press). Experimental investigation of interfacial tension in two-phase system involving methane and water. (Thesis). University of Salford

The understanding of the physical properties of reservoir fluids such as viscous and interfacial forces is critical in many oil and gas, petrochemical, and other related industries. In oil and gas industry, the production, transportation and processi... Read More about Experimental investigation of interfacial tension in two-phase system involving methane and water.

Integrated leak detection in gas pipelines using OLGA simulator and artificial neural networks
Presentation / Conference
Afebu, K., Abbas, A., Nasr, G., & Kadir, A. Integrated leak detection in gas pipelines using OLGA simulator and artificial neural networks. Presented at Abu Dhabi International Petroleum Exhibition and Conference, Abu Dhabi, UAE

Gas pipeline leakages do not only represent loss of valuable non-renewable resources but also a potential source of environmental pollution and fire disaster, thus making it very important to have a quick and accurate leak awareness scheme in pipelin... Read More about Integrated leak detection in gas pipelines using OLGA simulator and artificial neural networks.

Characterising high pressure overlapping sprays using Phase Doppler Anemometry (PDA)
Presentation / Conference
Nourian, A., Burby, M., El Kamkhi, M., & Nasr, G. Characterising high pressure overlapping sprays using Phase Doppler Anemometry (PDA). Presented at ILASS Americas 2011 - 23rd annual conference on liquid atomization and spray systems, Ventura, California, United States of America

The high pressure overlapping flat spray atomiser are used for removing scale deposition and the blockage that normally experienced in the well bore of oil and gas production tubing. This method provides significant advantages over current scale remo... Read More about Characterising high pressure overlapping sprays using Phase Doppler Anemometry (PDA).

Effect of swirl chamber on uniform spray coating of surfaces using Spill-Return Atomiser (SRA)
Presentation / Conference
Burby, M., Nasr, G., Nourian, A., & Stewart, J. Effect of swirl chamber on uniform spray coating of surfaces using Spill-Return Atomiser (SRA). Presented at ILASS Americas 2011 - 23rd annual conference on liquid atomization and spray systems, Ventura, California, United States of America

The atomisation of liquid disinfectants is an efficient means of delivering disinfectant agents within the healthcare environment; a Spill-Return Swirl Atomiser (SRA) with a long swirl chamber was designed for this purpose. The control of spray chara... Read More about Effect of swirl chamber on uniform spray coating of surfaces using Spill-Return Atomiser (SRA).

Fine sprays for coating and decontamination in the healthcare environments
Presentation / Conference
Nasr, G., Burby, M., Nourian, A., & Nagib, M. Fine sprays for coating and decontamination in the healthcare environments. Presented at ILASS 2011 - the 24th European Conference on Liquid Atomization and Spray Systems, Estoril, Portugal

A spray unit has been developed for the purpose of coating and decontamination within healthcare environments. The unit provides uniform spray coverage onto a given surface, in absence of streaking patternations. This investigation used four exempla... Read More about Fine sprays for coating and decontamination in the healthcare environments.

Fine spray behaviour upon impaction of varied material surfaces
Presentation / Conference
Stewart, J., Nasr, G., Burby, M., & Nourian, A. Fine spray behaviour upon impaction of varied material surfaces. Presented at ILASS Americas 2010 - 22nd annual conference on liquid atomization and spray systems, Cincinnati, Ohio

A mobile fine spray unit, utilising a spill-return atomiser has been developed for the purpose of decontamination within healthcare environments. The unit must be able to spray uniformly onto any given surface, providing ‘mist like’ coverage. Any s... Read More about Fine spray behaviour upon impaction of varied material surfaces.

A study into the mapping of an induced fracture in a fine grained sediment in biaxial and triaxial stress formations
Thesis
Penketh, S. (in press). A study into the mapping of an induced fracture in a fine grained sediment in biaxial and triaxial stress formations. (Thesis). University of Salford

Unconventional hydrocarbon extraction has increased in the last twenty years due to the post-industrial west needing to increase energy security. This has meant tapping into hydrocarbon resources that are trapped within impermeable sediments. Shale... Read More about A study into the mapping of an induced fracture in a fine grained sediment in biaxial and triaxial stress formations.