Outputs (16)

Investigation of pulsed D.C magnetron sputtering for the component layers of CuInSe2 baseed solar cells (2011)
Presentation / Conference
Karthikeyan, S., Hill, A., & Pilkington, R. (2011, December). Investigation of pulsed D.C magnetron sputtering for the component layers of CuInSe2 baseed solar cells. Presented at Condensed Matter and Materials Physics 2011, Lancashire County Cricket Club, Manchester , UK

Pulsed D.C Magnetron Sputtering (PDMS) has been used to deposit the component layers required in the production of CuInSe2 (CIS), thin film solar cells. PDMS employs high plasma densities and is widely used for the reactive sputtering of dielectric... Read More about Investigation of pulsed D.C magnetron sputtering for the component layers of CuInSe2 baseed solar cells.

Novel low temperature pulsed d.c. magnetron sputtering of single phase β-In2S3 buffer layers for CIGS solar cell application (2011)
Presentation / Conference
Karthikeyan, S., Hill, A., & Pilkington, R. (2011, November). Novel low temperature pulsed d.c. magnetron sputtering of single phase β-In2S3 buffer layers for CIGS solar cell application. Presented at 2nd Computing, Science and Engineering Postgraduate Research Doctoral Scholl Conference 2011, University of Salford

This work explores the possibilities of using the pulsed d.c. magnetron sputtering (PDMS) process for depositing the buffer layer for copper indium diselenide - CuInSe2 (CIS) - based solar cells. The use of PDMS can give a high plasma density and pro... Read More about Novel low temperature pulsed d.c. magnetron sputtering of single phase β-In2S3 buffer layers for CIGS solar cell application.

Pulsed D.C Magnetron Sputtered Mo, CuInSe2 and In2O3 Films from Powder Targets for Solar Cell Applications. (2011)
Presentation / Conference
Karthikeyan, S., Hill, A., & Pilkington, R. (2011, April). Pulsed D.C Magnetron Sputtered Mo, CuInSe2 and In2O3 Films from Powder Targets for Solar Cell Applications. Presented at Photovoltaic Science Applications and Technology, Heriot-Watt University, Ediunburgh

Pulsed D.C. Magnetron Sputtering (PDMS) is commonly used in reactive sputtering of dielectric materials because of its improved arc suppression. This is achieved by pulsing the d.c. voltage in the mid frequency region (10 to 350 kHz) to suppress the... Read More about Pulsed D.C Magnetron Sputtered Mo, CuInSe2 and In2O3 Films from Powder Targets for Solar Cell Applications..

Pulsed D.C Magnetron Sputtered Mo, CuInSe2 and In2O3 Films from Powder Targets for Solar Cell Applications. (2011)
Presentation / Conference
Karthikeyan, S., Hill, A., & Pilkington, R. (2011, April). Pulsed D.C Magnetron Sputtered Mo, CuInSe2 and In2O3 Films from Powder Targets for Solar Cell Applications. Presented at Photovoltaic Science Applications and Technology, Heriot-Watt University, Ediunburgh

Pulsed D.C. Magnetron Sputtering (PDMS) is commonly used in reactive sputtering of dielectric materials because of its improved arc suppression. This is achieved by pulsing the d.c. voltage in the mid frequency region (10 to 350 kHz) to suppress the... Read More about Pulsed D.C Magnetron Sputtered Mo, CuInSe2 and In2O3 Films from Powder Targets for Solar Cell Applications..

The effect of oxygen on the properties of pulsed d.c magnetron sputtered In2O3 films (2010)
Presentation / Conference
Karthikeyan, S., Hill, A., & Pilkington, R. (2010, November). The effect of oxygen on the properties of pulsed d.c magnetron sputtered In2O3 films. Presented at 1st CSE Doctoral School Postgraduate Research Conference, University of Salford, Salford

Thin films that have high transparency and conductivity are used in various applications such as displays, solar cells, electrochromic devices and heatable glasses (Granqvist and Hultåker, 2002;1-5). This present work describes the deposition of tra... Read More about The effect of oxygen on the properties of pulsed d.c magnetron sputtered In2O3 films.

The effect of oxygen on the properties of pulsed d.c magnetron sputtered In2O3 films (2010)
Presentation / Conference
Karthikeyan, S., Hill, A., & Pilkington, R. (2010, November). The effect of oxygen on the properties of pulsed d.c magnetron sputtered In2O3 films. Presented at 1st CSE Doctoral School Postgraduate Research Conference, University of Salford, Salford

Thin films that have high transparency and conductivity are used in various applications such as displays, solar cells, electrochromic devices and heatable glasses (Granqvist and Hultåker, 2002;1-5). This present work describes the deposition of tra... Read More about The effect of oxygen on the properties of pulsed d.c magnetron sputtered In2O3 films.

Properties of CuInSe2 and Mo thin films produced by pulsed d.c magnetron sputtering for solar cell fabrication (2010)
Presentation / Conference
Karthikeyan, S., Hill, A., Cowpe, J., & Pilkington, R. (2010, August). Properties of CuInSe2 and Mo thin films produced by pulsed d.c magnetron sputtering for solar cell fabrication. Poster presented at Photon 10, Southampton

Copper indium diselenide (CIS) is one of the most promising semiconducting thin film materials used in the solar cell industry. A typical CIS based solar cell comprises a Mo/CuInSe2/CdS/i-ZnO/ZnO heterojunction. This work describes the use of pulsed... Read More about Properties of CuInSe2 and Mo thin films produced by pulsed d.c magnetron sputtering for solar cell fabrication.

Properties of CuInSe2 and Mo thin films produced by pulsed d.c magnetron sputtering for solar cell fabrication (2010)
Presentation / Conference
Karthikeyan, S., Hill, A., Cowpe, J., & Pilkington, R. (2010, August). Properties of CuInSe2 and Mo thin films produced by pulsed d.c magnetron sputtering for solar cell fabrication. Poster presented at Photon 10, Southampton

Copper indium diselenide (CIS) is one of the most promising semiconducting thin film materials used in the solar cell industry. A typical CIS based solar cell comprises a Mo/CuInSe2/CdS/i-ZnO/ZnO heterojunction. This work describes the use of pulsed... Read More about Properties of CuInSe2 and Mo thin films produced by pulsed d.c magnetron sputtering for solar cell fabrication.

Paschen curve analysis to optimise pulsed d.c. sputtering plasmas (2010)
Presentation / Conference
Karthikeyan, S., Hill, A., Pilkington, R., & Cowpe, J. (2010, March). Paschen curve analysis to optimise pulsed d.c. sputtering plasmas. Poster presented at 37th IoP Conference on Plasma Physics, Windermere

The behaviour of the breakdown voltage of a pulsed d.c. magnetron sputtering system under various operating conditions has been studied with reference to Paschen’s Law. This can help to understand the conditions necessary for a stable breakdown at lo... Read More about Paschen curve analysis to optimise pulsed d.c. sputtering plasmas.

Paschen curve analysis to optimise pulsed d.c. sputtering plasmas (2010)
Presentation / Conference
Karthikeyan, S., Hill, A., Pilkington, R., & Cowpe, J. (2010, March). Paschen curve analysis to optimise pulsed d.c. sputtering plasmas. Poster presented at 37th IoP Conference on Plasma Physics, Windermere

The behaviour of the breakdown voltage of a pulsed d.c. magnetron sputtering system under various operating conditions has been studied with reference to Paschen’s Law. This can help to understand the conditions necessary for a stable breakdown at lo... Read More about Paschen curve analysis to optimise pulsed d.c. sputtering plasmas.