Dr Sabine Von-Hunerbein's Outputs (10)

Wind turbine amplitude modulation: research to improve understanding as to its cause & effect (2013)
Report
Cand, M., Bullmore, A., Smith, M., von Hünerbein, S., & Davis, R. (2013). Wind turbine amplitude modulation: research to improve understanding as to its cause & effect

This report contains full details of Renewable UK’s research into amplitude modulation, detailing the identification, occurrence and mitigation of a characteristic known as Other Amplitude Modulation(OAM).

Health impacts of wind turbines (2013)
Report
von Hünerbein, S., Moorhouse, A., Fiumicelli, D., & Baguley, D. (2013). Health impacts of wind turbines

This report presents the results of a rapid, desk based analysis of peer reviewed UK and international literature from the last four years on the effects of wind turbines on human health. The review covers literature specified by the Scottish governm... Read More about Health impacts of wind turbines.

UpWind: integrated wind turbine design - Salford final summary on WP 6.1, WP.6.2, WP 6.3 And WP 6.4 (2011)
Report
von Hünerbein, S., Bradley, S., & Piper, B. (2011). UpWind: integrated wind turbine design - Salford final summary on WP 6.1, WP.6.2, WP 6.3 And WP 6.4

Within the Upwind project the University of Salford provided development work for SODAR instruments in relation to the next generation of wind turbines. The main focus of the work was on the identification and proposal of design improvements, the dev... Read More about UpWind: integrated wind turbine design - Salford final summary on WP 6.1, WP.6.2, WP 6.3 And WP 6.4.

Noise and vibration from building-mounted micro wind turbines Part 2: Results of measurements and analysis (2011)
Report
Part 2: Results of measurements and analysis

Description

To research the quantification of vibration from a micro turbine, and to develop a method of prediction of vibration and structure borne noise in a wide variety of installations in the UK.

Objective

The objectives of the study... Read More about Noise and vibration from building-mounted micro wind turbines Part 2: Results of measurements and analysis.

Noise and vibration from building-mounted micro wind turbines part 3 : prediction methodology (2011)
Report
part 3 : prediction methodology

This brief report describes a simplified method for estimation of
levels of structure-borne sound in buildings to which a micro-wind
turbine (MWT) is attached. The method is applicable to two specific
designs of MWT, each for three lengths of moun... Read More about Noise and vibration from building-mounted micro wind turbines part 3 : prediction methodology.

Noise and vibration from building-mounted micro wind turbines Part 1: Review and proposed methodology (2011)
Report
Moorhouse, A., Elliott, A., Eastwick, G., von Hünerbein, S., & Waddington, D. (2011). Noise and vibration from building-mounted micro wind turbines Part 1: Review and proposed methodology

Description

To research the quantification of vibration from a micro turbine, and to develop a method of prediction of vibration and structure borne noise in a wide variety of installations in the UK.

Objective

The objectives of the study... Read More about Noise and vibration from building-mounted micro wind turbines Part 1: Review and proposed methodology.

Research into aerodynamic modulation of wind turbine noise: final report (2007)
Report
final report

The study described in this report has been commissioned by Defra, BERR (formerly DTI) and CLG. It follows on from a report by the Hayes McKenzie Partnership to DTI in 2005 in which reports of low frequency noise emission from windfarms were investig... Read More about Research into aerodynamic modulation of wind turbine noise: final report.

SODAR calibration for wind energy applications, final reporting on WP3, EU WISE project NNE5-2001-297 (2005)
Report
Bradley, S., Antoniou, I., von Hünerbein, S., Kindler, D., Jorgensen, H., & De Noord, M. (2005). SODAR calibration for wind energy applications, final reporting on WP3, EU WISE project NNE5-2001-297

The method traditionally used for measuring the wind speed and direction for wind energy purposes is to record the output from cup or propeller anemometers and vanes at several heights on a mast. As turbines have grown in height, this method has bec... Read More about SODAR calibration for wind energy applications, final reporting on WP3, EU WISE project NNE5-2001-297.

On the theory of SODAR measurement techniques (final reporting on WP1, EU WISE project NNE5-2001-297) (2003)
Report
Antoniou, I., Jorgensen, H., Ormel, F., Bradley, S., von Hünerbein, S., Emeis, S., & Warmbier, G. (2003). On the theory of SODAR measurement techniques (final reporting on WP1, EU WISE project NNE5-2001-297)

The need for alternative means to measure the wind speed for wind energy purposes has increased with
the increase of the size of wind turbines. The cost and the technical difficulties for performing wind
speed measurements has also increased with t... Read More about On the theory of SODAR measurement techniques (final reporting on WP1, EU WISE project NNE5-2001-297).

Perception of noise from large wind turbines (EFP-06 Project)
Report
(EFP-06 Project)

Is noise from large wind turbines more annoying than noise from small wind turbines? This is a question that is discussed widely in the context of a new generation of large wind turbines replacing the traditional smaller ones. To date legislation ta... Read More about Perception of noise from large wind turbines (EFP-06 Project).